Editing Drop base type air cleaner
(
diff
)
â Older revision
|
Latest revision
(
diff
) |
Newer revision â
(
diff
)
Jump to:
navigation
,
search
{{Youcanedit}} ==Overview== The drop base air cleaner came about to allow the air filter assembly to clear the Corvette hood, yet still provide enough filter element area. Several types were used throughout the years, the most drop is the base used on the L72/l78/L88/L89 Corvette BBC engine. Other bases were also dropped and were used on various SBC engines. ==Aftermarket filter assemblies== Moroso and Edelbrock sell a version of the 14" diameter L88 type drop base air cleaner assembly. Neither has quite the drop of the L-88 base. [[File:Eddy drop base air cleaner.jpgâ|frame|center|Edelbrock 14â p/n 1221 drop base air cleaner assembly]] [[File:Moroso drop base air cleaner.jpg|frame|left|Moroso p/n 65927 drop base air cleaner assembly]] <br style="clear: both" /> ===HEI clearance=== Besides the drop for hood clearance, to some having room for an HEI distributor is important. Considerable cutting was needed on the L88 base as seen below: [[File:L88 drop base clearance hei.jpg|frame|left|400px| L88 14" drop base HEI clearance]] <br style="clear: both" />The difference in the amount of drop between the two bases- the L88 is lower. Also note the Moroso (below) has better HEI clearance: [[File:Moroso drop base clearance hei.jpg|frame|left|400px|Moroso p/n 65927 14" drop base clearance HEI]] <br style="clear: both"/> ==Filter size formulas== *Square inches of filter required for a motor = CID x Maximum RPM / 20839 *CFM required for a 4 stroke motor = CID x Maximum RPM / 3456 *CFM required for a 2 stroke motor = CID x Maximum RPM / 1728 *CFM required for a turbocharged or supercharged motor = Pounds of Boost / 14.7 **Add 1.0 to this answer. This relates to #2 and #3 **Example: (CID x maximum RPM x #4 ) / 3456 or 1728 *To find circumference of a circle multiply diameter by 3.1416 *To find diameter of a circle multiply circumference by .31831 '''CFM Formulas for Filters''' *Round: Diameter x Height x 6 x 3.14 *Flat Panel: Length x Width x 6 *Universal Round Taper: (Base + Top) / 2 = A; take A x Length x 6 x 3.14 *Universal Round Straight: Diameter x Length x 6 x 3.14 ==Other things that can be done to gain hood clearance== Using a bolt to hold down the air filter assembly lid will gain some clearance. Cut or find a suitable bolt that fits instead of using a stud and wing nut. An obvious choice is to use a shorter filter element. But remember that the engine gets all its air through the filter and if it's too small, the results are a too-rich condition, poor performance ans economy, as well as a shorter air filter element service life. [http://www.thedirtforum.com/airfilterheight.htm Air filter height calculator] ==Other info== [http://www.bobistheoilguy.com/airfilter/airtest2.htm Air filter flow tests] [[Category:Engine]]
|
Editing help
(opens in new window)
Template:Rounded
(
edit
)
Template:Youcanedit
(
view source
)
Personal tools
Log in / create account
Namespaces
Page
Discussion
Variants
Views
Read
Edit
View history
Actions
Search
Navigation
Main Page
Recent changes
Random page
Help
All articles
Start a new article
Hotrodders forum
Categories
Best articles
Body and exterior
Brakes
Cooling
Electrical
Engine
Fasteners
Frame
Garage and shop
General hotrodding
Identification and decoding
Interior
Rearend
Safety
Steering
Suspension
Tires
Tools
Transmission
Troubleshooting
Wheels
Toolbox
What links here
Related changes
Special pages
Terms of Use
Copyright
Privacy Policy
Your Privacy Choices
Manage Consent