Editing Intake manifold (section)
Jump to:
navigation
,
search
===High rise=== [[File:Stealth 8016.jpg|thumb|right|400px|Original Stealth p/n 8016 intake]] As of 2012 the Edelbrock Performer RPM/RPM Air-Gap intake manifold is considered to be the best of the breed. It consistently makes as good if not better power over a wider range than any of it's competitors. In fact, it rivals the open plenum intakes like the Edelbrock Vic/Vic Jr.- even at the top of the powerband, unless the cam and cylinder head intake volume are up there pretty good. It will always make more bottom end than the open plenum intakes but that is to be expected. But what is surprising is how well the RPM performs at the top of the power band. The original Weiand Stealth p/n 8016, which has been discontinued and replaced by p/n 8150, is considered by some who are "in the know" to be an equal to the Edelbrock RPM. The original Holley p/n 300-36 was possibly the best of breed in its day, and it isn't made any longer either. The replacement Holley p/n 300-36S is NOT the same manifold. The Edelbrock RPM 7101, Weiand Stealth 8016 and Holley Street Dominator 300-36 were all patterned after the dual plane, high rise intake first used on the Z-28 and LT-1 in the late '60s and early '70s. Those original aluminum Chevy manifolds were cast by the Winters Foundry and will have the Winters "snowflake" cast into the aluminum. [[File:CB3 003.jpg|thumb|400px|left|The Edelbrock C3B was originally designed for the Holley 3-barrel carb (note the plenum notch to clear the secondary throttle plate of the Holley 3-barrel). Still a decent intake for a mid-sized SBC. HEI will usually just barely clear, may need slight clearancing]] <br style="clear:both"/> [[File:Typhoon 52021.jpg|thumb|300px|Typhoon p/n 52021]] Professional Products makes a manifold of this design also, called the Typhoon, p/n 52021 for satin finish. Ad copy on the various Professional Products intake manifolds can be read [http://www.professional-products.com/manifoldsProductSBchevy.php here]. <br style="clear:both"/>
|
Editing help
(opens in new window)
Personal tools
Log in / create account
Namespaces
Page
Discussion
Variants
Views
Read
Edit
View history
Actions
Search
Navigation
Main Page
Recent changes
Random page
Help
All articles
Start a new article
Hotrodders forum
Categories
Best articles
Body and exterior
Brakes
Cooling
Electrical
Engine
Fasteners
Frame
Garage and shop
General hotrodding
Identification and decoding
Interior
Rearend
Safety
Steering
Suspension
Tires
Tools
Transmission
Troubleshooting
Wheels
Toolbox
What links here
Related changes
Special pages
Terms of Use
Copyright
Privacy Policy
Your Privacy Choices
Manage Consent